Acoustic Blankets & Rolls: Quilted Fiberglass
Construction Sound Barrier Blankets: Quilted Fiberglass Panel
Quilted Fiberglass Panel Absorbers reduce the reflection of sound waves by adding soft, porous, open-celled materials to any environment. IES – 2000 LLC’s Quilted Fiberglass panel products like sound barrier blanket, construction sound blankets consists of various configurations of facing and fiberglass thicknesses to provide solutions to a plethora of applications. Wall panels and overhead baffles are constructed with all edges bound and grommets across the top. Rolls are available 4’ wide x 25’ long and can be supplied with edges bound or unbound. Applications: Typically used when you are trying to reduce the reflection of sound waves or reverberant noise energy within a piece of equipment, a room, or a building. Also used to supplement plywood structures on job sites to improve the transmission loss of the wood as well as to reduce reflected noise on the construction side.
By adding porous and soft materials to any environment, quilted fiberglass panels help reduce the reflection of sound waves. At IES 2000, we offer high-quality fiberglass sound insulation solutions consisting of various configurations. The configurations include different thicknesses and appearances that provide solutions to various applications. Besides, overhead baffles and sound barrier blankets are constructed with all grommets across the top.
We have quilted fiberglass panels that are high performance, fire-safe, and durable. They can be used to reduce reverberant airborne noise and are an excellent alternative to urethane foams. This is because they possess high mechanical strength, exhibit low fire emissions, and are Class A fire rated. Besides, they have a wide temperature range. You can also clean them, and they are unaffected by oils, dirt, dust, humidity, moisture, and most chemicals. Our construction sound blankets have extremely long service lives, will not degrade, and you can install them easily.
Applications of Qualified Fiberglass Panels
- Quilted fiberglass panels are used in reducing reverberant noise energy or the reflection of sound waves within a building, a room, or a piece of equipment.
- It is also used to supplement the use of plywood structures on job sites. They typically help reduce reflected noise on construction sites.
| QA-1 | QA-3 | QA-7 | QA-10 | QA-11 | |
|---|---|---|---|---|---|
| Nominal Thickness | QA-11" | QA-31" | QA-72" | QA-102" | QA-112" |
| Temperature Range | QA-1-20° to +180° F | QA-3-20° to +350° F | QA-7-20° to +180° F | QA-10-20° to +180° F | QA-11-90° to +500° F |
| Standard Width | QA-148" | QA-348" | QA-748" | QA-1048" | QA-1148" |
| Roll Length | QA-150' | QA-350' | QA-725' | QA-1025' | QA-1125' |
| Weight | QA-1 | QA-3 | QA-7.45 # psf | QA-10.45 # psf | QA-11.45 # psf |
| Density | QA-11.6 lb/ft^3 | QA-31.6 lb/ft^3 | QA-7 | QA-10 | QA-11 |
| Moisture Permeability | QA-1 | QA-3 | QA-7 | QA-10 | QA-110.5 perms |
| Flammability / Flame Spread | QA-117.66 | QA-32.07 | QA-717.66 | QA-1017.66 | QA-114.95 |
| Flammability / Smoke Density | QA-122.75 | QA-30.45 | QA-722.75 | QA-1022.75 | QA-1111.43 |
| Frequencies (Hz) | QA-1ASTM C 423 | QA-3ASTM E-90 & E 413 | QA-7ASTM & C 423 | QA-10ASTM & C 423 | QA-11ASTM & C 423 |
| Class | QA-1 | QA-31 or A per ASTM E84 | QA-7 | QA-101 or A per ASTM E84 | QA-111 or A per ASTM E84 |
| NRC rating | QA-1 | QA-30.8 | QA-7 | QA-100.85 | QA-110.85 |
| Edges | QA-1Bound or Unbound | QA-3 | QA-7Bound or Unbound | QA-10Bound or Unbound | QA-11Bound or Unbound |
| Available colors | QA-1 | QA-3 | QA-7 | QA-10Black, Gray, Tan or White | QA-11 |
| Octave Band Center Frequencies (Hz) | QA-1 | QA-3 | QA-7 | QA-10 | QA-11 |
| 125 | QA-10.12 | QA-30.4 | QA-70.07 | QA-100.19 | QA-110.19 |
| 250 | QA-10.47 | QA-30.3 | QA-70.27 | QA-100.99 | QA-110.99 |
| 500 | QA-10.85 | QA-30.78 | QA-70.96 | QA-100.96 | QA-110.96 |
| 1K | QA-10.84 | QA-31.02 | QA-71.13 | QA-100.8 | QA-110.8 |
| 2K | QA-10.64 | QA-31 | QA-71.08 | QA-100.57 | QA-110.57 |
| 4K | QA-10.6 | QA-31.1 | QA-71 | QA-100.3 | QA-110.3 |
| NRC rating | QA-10.7 | QA-30.8 | QA-70.9 | QA-100.09 | QA-110.9 |
| Material | QA-1Vinyl coated fiberglass cloth facing / fiberglass batting with non-porous scrim facing | QA-3Non-woven porous scrim /fiberglass batting with non-woven porous scrim. | QA-7Vinyl coated fiberglass cloth facing/ fiberglass batting with non-porous scrim facing. | QA-10Vinyl coated fiberglass cloth facing / fiberglass batting / vinyl coated fiberglass cloth facing | QA-11Silicone coated fiberglass cloth facing/ fiberglass batting/ Silicone coated fiberglass cloth facing. |
| Stitching | QA-1Straight-stitch or diamond quilt patterns | QA-3 | QA-7 | QA-10 | QA-11 |
| Typical Applications | QA-1Typically used when you are trying to reduce the reflection of sound waves or reverberant noise energy within a piece of equipment, a room, or a building. | QA-3Typically used as a sound absorption panel or an acoustical liner. Also used as a decoupler when combined with our 1B Lag Acoustical Pipe & Duct product to enhance its acoustical performance. | QA-7Typically used when you are trying to reduce the reflection of sound waves or reverberant noise energy within a piece of equipment, a room, or a building. | QA-10Typically used when you are trying to reduce the reflection of sound waves or reverberant noise energy within a piece of equipment, a room, or a building. Also used to supplement plywood structures on job sites to improve the transmission loss of the wood as well as to reduce reflected noise on the construction side. | QA-11Silicone faced quilted fiberglass absorbers are typically used to reduce reverberant noise energy within a piece of equipment, room, or building where the product may be subjected to high temperature, sunlight, water or oil. Also used as a high temperature duct wrap, or on an outdoor application where UV resistance is required. |
Curtains: Industrial & Flexible Barriers
Curtains
Acoustic Curatins - ABA
The ABA “Barrier septum Composite” is a non-reinforced loaded vinyl noise barrier sandwiched between two layers of fiberglass. A variety of facings are available including our standard industrial grade vinyl facing, an economy scrim facing and a silicone facing for high temperature or outdoor applications. Curtain quilted fiberglass panels are typically constructed with grommets across the top and mating hook and loop closures on the vertical edges.
Rolls measuring 4' x 25' are available with edges bound or unbound. All products have a Class A flammability rating (per ASTM E-84 ). Use as a divider wall when separating two noisy areas that require absorption. Use to line the perimeter of a building Use anywhere a decoupler/barrier/absorber is required. Vinyl facings are available in white, tan, black, or gray Diamond patterns or straight stitch patterns are available.
PDF Spec Sheets: ABA-111S, ABA-111, ABA-112, ABA-121
“ABA” composite features a non-reinforced loaded vinyl noise barrier septum (middle) with a quilted fiberglass sound insulation absorber on BOTH sides. Ideally suited as an acoustical liner, the inner layer of quilted fiberglass panel decouples the barrier form the surface to improve its noise blocking ability while the outer layer adds sound absorption to the treated environment. Composites offer maximum noise reduction on any application by combining sound absorption and noise barrier materials. These composites are available in a barrier backed or barrier septum configuration utilizing a variety of quilted fiberglass panel absorbers and flexible noise barriers.
Sound Absorption/Noise Barrier Composites are supplied as roll goods, finished panels, enclosure systems, acoustical jackets and die-cut pieces.
Product Features
- Maximum noise reduction by combining sound absorber and noise barrier
- Sound Absorption Rating to NRC-1.05
- Transmission Loss Rating to STC-32
- Offered in two styles with a variety of combinations
- Acoustical liners, jackets, wraps and panels
- Available in curtain panels, bound or unbound rolls, custom fabrications or die-cut pieces
- Flexible composites conform to any shape
- Fire safe and low smoke emissions per ASTM E-84, Class 1
Available Barriers
PSF non-reinforced loaded vinyl noise barrier septum in:
- ½ lb
- 1 lb
- 2 lb
Acoustical Data
Sound Transmission Loss (dB) Octave and Center Frequencies (Hz) – ASTM E-90 & E 413
| Product | Thickness (In./Nom.) | Wt. Lb./S.F. | 125 | 250 | 500 | 1K | 2K | 4K | STC |
|---|---|---|---|---|---|---|---|---|---|
| ProductABA-111 | Thickness (In./Nom.)2 | Wt. Lb./S.F.1.5 | 12512 | 25016 | 50027 | 1K40 | 2K44 | 4K43 | STC29 |
| ProductABA-121 | Thickness (In./Nom.)2 | Wt. Lb./S.F.2.5 | 12519 | 25022 | 50028 | 1K40 | 2K56 | 4K61 | STC33 |
| Octave Band Center Frequencies (Hz) | |||||||
|---|---|---|---|---|---|---|---|
| Product | Octave Band Center Frequencies (Hz)125 | Octave Band Center Frequencies (Hz)250 | Octave Band Center Frequencies (Hz)500 | Octave Band Center Frequencies (Hz)1K | Octave Band Center Frequencies (Hz)2K | Octave Band Center Frequencies (Hz)4K | Octave Band Center Frequencies (Hz)NRC |
| ABA 2" thick | Octave Band Center Frequencies (Hz)0.19 | Octave Band Center Frequencies (Hz)0.99 | Octave Band Center Frequencies (Hz)0.96 | Octave Band Center Frequencies (Hz)0.8 | Octave Band Center Frequencies (Hz)0.57 | Octave Band Center Frequencies (Hz)0.33 | Octave Band Center Frequencies (Hz)0.85 |
Acoustic Curatins - BA
IES 2000's “BA” composite features a reinforced loaded vinyl noise barrier with a quilted fiberglass sound insulation absorber on one side. The rugged durable exterior barrier is commonly used as a wrap or acoustical jacket due to its ability to conform to any shape. The quilted fiberglass panel layer decouples the noise barrier to enhance its acoustical performance. IES 20O0, LLC BA's Noise Barrier/Sound Absorber Composite offers the benefits of a noise barrier and a sound absorber composite. The BA consists of a vinyl-coated-fiberglass-cloth facing on 2” quilted fiberglass that is bonded to a reinforced 1-lb psf. loaded vinyl barrier.
Curtain panels are constructed with grommets across the top and Velcro along the vertical edges. Rolls are available 54” wide x 25' long and can be supplied with edges bound or unbound (note: barrier is 54” wide, quilt is held 3” in from each vertical edge, and measures 48”).
PDF Spec Sheets:
BA-11(S),
BA-11,
BA-21(S),
BA-21,
BB-RP Acoustical Roof panel
Application
Typically used as curtain panels in acoustical curtain enclosures where abuse resistance or excellent durability as well as maximum noise reduction is required. Frequently used as sliding doors on acoustical curtain enclosures, or as a temporary noise barrier on outdoor construction projects. Specialty composites can incorporate rigid fiberglass board, various facing and different weighs of barrier. Applications include plenum barriers, engine compartment liners, acoustical jackets, pipe lagging, and any area where both sound absorption and noise barriers are required.
Product Features
- Vinyl coated fiberglass cloth facing on 2” quilted fiberglass/ 1lb-psf reinforced loaded vinyl barrier
- Flammability/Flame Spread: 23.0
- Flammability/Smoke density: 30.0
- Nominal thickness: 2.0"
- Temperature range: -20° to +180° F
- Standard width: 54"
- Roll length: 25'
- Weight: 1.5lb
Acoustical Data
Sound Transmission Loss (dB) Octave and Center Frequencies (Hz) - ASTM E-90 & E 413
| Product |
Thickness (In./Nom.) |
Wt. Lb./S.F. | 125 | 250 | 500 | 1K | 2K | 4K | STC |
|---|---|---|---|---|---|---|---|---|---|
| ProductBA-21 |
Thickness (In./Nom.)2 |
Wt. Lb./S.F.2.5 | 12513 | 25020 | 50029 | 1K40 | 2K50 | 4K55 | STC32 |
| ProductBA-11 |
Thickness (In./Nom.)1 |
Wt. Lb./S.F.1.3 | 12511 | 25016 | 50024 | 1K30 | 2K35 | 4K35 | STC27 |
| ProductBA-21-S |
Thickness (In./Nom.)2 |
Wt. Lb./S.F.2.5 | 12513 | 25020 | 50029 | 1K40 | 2K50 | 4K55 | STC32 |
| ProductBA-11-S |
Thickness (In./Nom.)1 |
Wt. Lb./S.F.1.3 | 12511 | 25016 | 50024 | 1K30 | 2K35 | 4K35 | STC27 |
| Octave Band Center Frequencies (Hz) | |||||||
|---|---|---|---|---|---|---|---|
| Product | Octave Band Center Frequencies (Hz)125 | Octave Band Center Frequencies (Hz)250 | Octave Band Center Frequencies (Hz)500 | Octave Band Center Frequencies (Hz)1K | Octave Band Center Frequencies (Hz)2K | Octave Band Center Frequencies (Hz)4K | Octave Band Center Frequencies (Hz)NRC |
| BA 1" thick | Octave Band Center Frequencies (Hz)0.12 | Octave Band Center Frequencies (Hz)0.47 | Octave Band Center Frequencies (Hz)0.85 | Octave Band Center Frequencies (Hz)0.84 | Octave Band Center Frequencies (Hz)0.64 | Octave Band Center Frequencies (Hz)0.62 | Octave Band Center Frequencies (Hz)0.7 |
| BA 2" thick | Octave Band Center Frequencies (Hz)0.12 | Octave Band Center Frequencies (Hz)0.27 | Octave Band Center Frequencies (Hz)0.96 | Octave Band Center Frequencies (Hz)1.13 | Octave Band Center Frequencies (Hz)1.08 | Octave Band Center Frequencies (Hz)0.99 | Octave Band Center Frequencies (Hz)0.85 |
| BA 4" thick | Octave Band Center Frequencies (Hz)0.21 | Octave Band Center Frequencies (Hz)0.89 | Octave Band Center Frequencies (Hz)1.09 | Octave Band Center Frequencies (Hz)1.17 | Octave Band Center Frequencies (Hz)1.13 | Octave Band Center Frequencies (Hz)1.07 | Octave Band Center Frequencies (Hz)1.05 |
Flexible Barriers
1BC Noise Barrier
Transparent PVC Barrier
1BC is a transparent poly-vinyl chloride noise, wind and thermal barrier. It is designed to minimize the passage of sound, heat, cold, or wind from one area to another while offering maximum visibility. Offers significant noise reduction while allowing for visibility and easy access.
Application
IES - 2000's 1BC is available in roll form (up to 60' long), or in fabricated panels with grommets at the top and Velcro seals along each vertical edge. Standard panel width is 48″ , length as required. Custom sizes are available. In strip form rolls are available up to 100' long. Strips cut to length are available with mounting holes punched 2″ on center.
Product Features
- Available in a USDA approved version
- 1 Pound Per Square Foot Transparent PVC Barrier
- Rolls available 48″ wide up to 60'
- Strips available 16″ wide up to 100' long
- Temperature Range: -20° F to +150° F
Acoustical Data
Acoustical Data: Sound Transmission Loss (dB) Octave and Center Frequencies (Hz) ASTM E-90
| Octave Band Center Frequencies (Hz) | |||||||
|---|---|---|---|---|---|---|---|
| Product | Octave Band Center Frequencies (Hz)125 | Octave Band Center Frequencies (Hz)250 | Octave Band Center Frequencies (Hz)500 | Octave Band Center Frequencies (Hz)1K | Octave Band Center Frequencies (Hz)2K | Octave Band Center Frequencies (Hz)4K | Octave Band Center Frequencies (Hz)STC |
| 1BC | Octave Band Center Frequencies (Hz)13 | Octave Band Center Frequencies (Hz)17 | Octave Band Center Frequencies (Hz)22 | Octave Band Center Frequencies (Hz)26 | Octave Band Center Frequencies (Hz)32 | Octave Band Center Frequencies (Hz)37 | Octave Band Center Frequencies (Hz)26 |
1BNR Noise Barrier
Non-Reinforced Loaded Vinyl Barrier
1BNR is a flexible non-reinforced loaded vinyl barrier that is designed to reduce the transmission of noise through walls, ceilings, and floors. Also used as a noise barrier component in acoustical composites.
- Limp, flexible, formable, versatile
- High tear and tensile strength
- Extremely easy to install
Application
Typically used as a noise barrier in gypsum wallboard and stud construction to substantially improve transmission loss between rooms. Also, utilized as a barrier septum material in acoustical curtain construction to form ABA style composites
Product Features
- 1 Pound Per Square Foot Non-Reinforced Loaded Vinyl Barrier
- Nominal thickness: 48″ sheet/roll, 16″ strips
- Standard width: 54″ wide
- Roll length: 30' or 60' long
- Weight: 1.0 lb psf
- Tensile (PSI): 220
- Elongation: 140%
- Service Temperature: -20° F to +180°
Acoustical Data
Acoustical Data: Sound Transmission Loss (dB) Octave and Center Frequencies (Hz) - ASTM E-90 & E 413
| Octave Band Center Frequencies (Hz) | |||||||
|---|---|---|---|---|---|---|---|
| Product | Octave Band Center Frequencies (Hz)125 | Octave Band Center Frequencies (Hz)250 | Octave Band Center Frequencies (Hz)500 | Octave Band Center Frequencies (Hz)1K | Octave Band Center Frequencies (Hz)2K | Octave Band Center Frequencies (Hz)4K | Octave Band Center Frequencies (Hz)STC |
| 1BNR | Octave Band Center Frequencies (Hz)13 | Octave Band Center Frequencies (Hz)17 | Octave Band Center Frequencies (Hz)22 | Octave Band Center Frequencies (Hz)26 | Octave Band Center Frequencies (Hz)32 | Octave Band Center Frequencies (Hz)37 | Octave Band Center Frequencies (Hz)26 |
1BR Noise Barrier
Reinforced Loaded Vinyl Barrier
1BR is a flexible reinforced loaded vinyl noise barrier featuring an internal reinforcement to offer maximum tear strength and durability. 1BR Panels can be used where a noise barrier wall is required. It is also commonly used in conjunction with IES -2000’s Quilted Fiberglass Panels Absorbers to form BA style acoustical curtain composites. 1BR is also available in a USDA approved grade.
- Curtain Panels available with grommets and Velcro
- Limp, flexible, formable, versatile
- High tear and tensile strength, Extremely durable
Application
Typically used where a rugged, tear resistant noise barrier is required. Also used as a barrier back material in BA style Acoustical Curtain Panels in an Acoustical Curtain Enclosure, acoustical jacket or wrap, and to serve as an accordion fold acoustical door. Suitable for outdoor use. Available in gray, tan, blue or olive drab. Additional sizes, fiberglass core densities and thicknesses available.
Product Features
- 1 Pound Per Square Foot Reinforced Load Vinyl Barrier
- Standard thickness: 0.107"
- Standard width: 54″
- Roll length: 60'
- Weight: 1.0 lb psf
- Tensile (PSI): 900 lb per square inch
- Tear (pound force): 70 lb/in
- Service Temperature: -20° F to +180°
Acoustical Data
Sound Transmission Loss (dB) Octave and Center Frequencies (Hz) ASTM E-90 & E 413
| Octave Band Center Frequencies (Hz) | |||||||
|---|---|---|---|---|---|---|---|
| Product | Octave Band Center Frequencies (Hz)125 | Octave Band Center Frequencies (Hz)250 | Octave Band Center Frequencies (Hz)500 | Octave Band Center Frequencies (Hz)1K | Octave Band Center Frequencies (Hz)2K | Octave Band Center Frequencies (Hz)4K | Octave Band Center Frequencies (Hz)STC |
| 1BR | Octave Band Center Frequencies (Hz)13 | Octave Band Center Frequencies (Hz)17 | Octave Band Center Frequencies (Hz)22 | Octave Band Center Frequencies (Hz)26 | Octave Band Center Frequencies (Hz)32 | Octave Band Center Frequencies (Hz)37 | Octave Band Center Frequencies (Hz)26 |
2BNR Noise Barrier
Reinforced Loaded Vinyl Barrier
2BNR is a flexible non-reinforced loaded vinyl noise barrier that is designed to reduce the transmission of noise through walls, ceilings, and floors. 2B NR is a two-pound per sq. ft. material specifically designed to offer greater noise attenuation than standard one-pound per sq. ft. products, primarily at low frequencies.
- Easy to install
- Limp, flexible, formable, versatile
- High tear and tensile strength
Application
Typical uses include as a noise barrier in dry wall and stud construction to substantially improve transmission loss between rooms. Also, utilized as a barrier septum material in acoustical curtain and foam composites.
Product Features
- 2 Pound Per Square Foot Non-Reinforced Load Vinyl Barrier
- Nominal thickness: 0.23"
- Standard width: 54″
- Roll length: 60'
- Weight: 2.0 lb psf
Acoustical Data
Sound Transmission Loss (dB) Octave and Center Frequencies (Hz) ASTM E-90 & E 413
| Octave Band Center Frequencies (Hz) | |||||||
|---|---|---|---|---|---|---|---|
| Product | Octave Band Center Frequencies (Hz)125 | Octave Band Center Frequencies (Hz)250 | Octave Band Center Frequencies (Hz)500 | Octave Band Center Frequencies (Hz)1K | Octave Band Center Frequencies (Hz)2K | Octave Band Center Frequencies (Hz)4K | Octave Band Center Frequencies (Hz)STC |
| 2BR | Octave Band Center Frequencies (Hz)16 | Octave Band Center Frequencies (Hz)22 | Octave Band Center Frequencies (Hz)26 | Octave Band Center Frequencies (Hz)32 | Octave Band Center Frequencies (Hz)35 | Octave Band Center Frequencies (Hz)40 | Octave Band Center Frequencies (Hz)31 |